Aeon Open Headphone
Voce Electrostatic Headphone
Aeon Closed Headphone
Ether C Headphone
Ether Flow Headphone
Ether C Flow Headphone
Omega Maple Headphone Stand
Omega Cherry Headphone Stand
Omega Walnut Headphone Stand
Omega Zebrano Headphone Stand
Omega Makassar Headphone Stand
You've been asking for a one-box, do-all, no-excuses desktop system that is ready for any headphone and powered monitor on the planet. We think we have it. At the same time, why don't we make this whole combined DAC/amp idea seem really outdated? Done and done. Welcome to Jotunheim!
Don't get stuck when DAC technology changes,choose Jotunheim and be ready for today, and the future. Configure Jotunheim to your needs: use it as just an amp, or add an internal USB DAC or Moving Magnet phono preamp. In the future, you'll be able to easily upgrade to a different module,maybe even something beyond a DAC or phono preamp.
IEMs? Sure. HE-6? Sure. If this means nothing to you, just be confident that you can plug any headphone into Jotunheim and get great sound, with ultimate power and authority. Balanced or single-ended,it doesn't matter. With 5W output into 32 ohms from the balanced outputs, Jotunheim has tons of power to spare.
Balanced and single-ended preamp outs mean that Jotunheim is ready for any powered desktop monitor,or to plug into those expensive monoblocks you've been eyeing.
Select high or low gain with the flick of a front-panel switch, for compatibility with both easy-to-drive and hard-to-drive headphones. Select balanced input, single-ended input, and an optional USB DAC, MM phono, or input module:
AK4490 DAC Module. Jotunheims optional DAC module uses two AK4490 DACs in a hardware-balanced configuration, with a passive-filtered output stage and asynchronous USB Gen 2 input. Add it to Jotunheim for a true best of both worlds amp and USB DAC.
Moving Magnet Phono Input Module. Or, choose the optional MM phono input module, for 42dB of gain and exceptional low-noise performance from a phono stage with fully passive RIAA, for great phono sound right on your desk.
Made in USA.
Jotunheim is covered by a 3-year limited warranty that covers parts and labour.
Maximum Power, 50 ohms: 800mW Maximum Power, 300 ohms: 350mW Maximum Power, 600 ohms: 175mW
THD: 0.001%, 20Hz-20KHz, at 1V RMS IMD: 0.0015%, CCIR SNR: 109db, A-weighted, referenced to 1V RMS Crosstalk: -70dB, 20 Hz-20KHz Output Impedance: Less than 0.1 ohms, balanced or SE, at both gain settings Gain: (6dB) or 8 (14dB), selectable via front switch Inputs: Balanced XLR and Single-Ended RCA, selectable via front switch Outputs: Balanced headphone (4-pin XLR), single-ended headphone (1/4â€ TRS), balanced line preamp, single-ended line preamp Gain Stage: Proprietary Schiit Pivot Pointâ„¢ fully discrete differential current-feedback topology Power Supply: One 48VA transformer with 6 stages of discrete or integrated regulation and over 70,000uF total filter capacitance
USB Input Receiver: C-Media CM6631A
D/A Conversion IC: AK4490 x 2
Analog Output: fully differential, passive summing and passive filtering
Frequency Response: 20Hz-20KHz, +/-0.1dB, 2-100kHz, -3dB
Maximum Output: 2.0V RMSâ€¨
THD: <0.0015%, 20Hz-20KHz, full scale
IMD: <0.002%, CCIRâ€¨
S/N: >106dB, referenced to 2V RMS, unweighted
THD: <0.01%, A-weighted, at 1V RMS
SNR: >80dB, A-weighted, inputs shorted
Crosstalk: -70dB, 20-20kHz
Sensitivity: 2.3mV for 400mV output
Overload Margin: >20dB
Input Impedance: 47k ohms
Input Capacitance: 100pf
RIAA Accuracy: +/- 0.25dB, 20-20kHz
Topology: Fully passive RIAA network with AD8599 gain stages and PET film capacitors throughout, DC coupled, with DC servo
Sorry no reviews yet!
Sorry not related yet!
No Items Yet!