Aeon Open Headphone
Voce Electrostatic Headphone
Aeon Closed Headphone
Ether C Headphone
Ether Flow Headphone
Ether C Flow Headphone
Omega Maple Headphone Stand
Omega Cherry Headphone Stand
Omega Walnut Headphone Stand
Omega Zebrano Headphone Stand
Omega Makassar Headphone Stand
The second-generation Fulla 2 is Schiit's answer to the question, “What’s the most affordable way I can get into great sound on my desktop?” And by “my desktop,” we mean everything on it. Fulla 2 is ready for your headphones, your powered monitors, your analog sources, and more.
Fulla 2 is a complete DAC/Amp in a single tiny case. Plug Fulla 2 into virtually any USB port, connect your headphones and/or powered monitors, and you’re set for great music. But that’s only the start.
Use it as a amp, Connect your phone (or any other analog source) to the convenient front jack.
Use it as a preamp, Connect to powered monitors or speaker amps using the variable outputs on the back.
Use it as a DAC, Connect to an external preamp or processor with the fixed 2V line outs on the back, or use the variable outputs for convenient volume control as well.
Use it with phones, iDevices, or computers with low-powered USB ports, We’ve included a second USB port for power input. Plug in your phone charger (or any other 5V DC source with micro-USB output) and Fulla 2 tells your source it doesn’t need any power.
Like DACs costing more than 10X this price, Fulla uses the latest AKM AK4490 D/A converter. Coupled with an Alps RK09 potentiometer, high-quality filter and amp stages from Texas Instruments, as well as precision thin-film resistors and film capacitors, Fulla delivers performance far beyond its modest price.
Fulla 2 delivers a super punch, up to 550mW into 16 ohms, together with a vanishingly low noise floor and low output impedance. Or, in English, this means it’s a great match for virtually any headphone.
By “made in USA,” Schiit mean made in USA. Fulla 2 is also covered by a 2-year limited warranty that covers parts and labour.
Frequency Response: 20Hz-20Khz, -0.1db, 2Hz-200KHz, -3dB
Maximum Power, 16 ohms: 250mW RMS per channel
Maximum Power, 32 ohms: 200mW RMS per channel
Maximum Power, 50 ohms: 175mW RMS per channel
Maximum Power, 300 ohms: 40mW RMS per channel
THD: Less than 0.004%, 20Hz-20KHz, at 1V RMS
IMD: Less than 0.005%, CCIR
SNR: Greater than 101db, unweighted, referenced to 1V RMS
Crosstalk: -67dB, 20 Hz-20KHz
Output Impedance: Less than 0.4 ohms
Gain: 1.5 (3.5db)
USB Receiver: C-Media CM6631A
Bit Depth and Sample Rates Supported: 16/44.1 to 24/96, including 24/88.2
DAC: AKM4396 with Analog Devices ADA4610-based filter stage
Output Stage: TI LMH6643 high current rail to rail amplifier
Headphone Output Size: 3.5mm, unlike all of our other amplifiers
Power Supply: Via USB, with +/- 5V rails via high current negative rial generator with inductor filtering and local regulation
Power Consumption: 0.8W typical
Size: 6.35 x 30.5 x 1.14 cm
Weight: 800 Gramms
*All measurements made on a Stanford Research SR1 or SR1+ Audio Analyser
Sorry no reviews yet!
Sorry not related yet!
No Items Yet!