Aeon Open Headphone
Voce Electrostatic Headphone
Aeon Closed Headphone
Ether C Headphone
Ether Flow Headphone
Ether C Flow Headphone
Omega Maple Headphone Stand
Omega Cherry Headphone Stand
Omega Walnut Headphone Stand
Omega Zebrano Headphone Stand
Omega Makassar Headphone Stand
Welcome to one of the most affordable tube hybrid amp on the planet with performance and versatility that eclipse amps costing much, much more. The all-new Vali 2 is a great way to get started with tube sound, without needing a second mortgage!
Some inexpensive (and not-so-inexpensive) tube amps don't use tubes to their full potential,starving them with low plate voltages or using op-amp buffers for output. Not Vali 2 it uses a unique, class-leading power supply that gives it 60V on the plate. Combined with a fully discrete, current-mode non-inverting hybrid topology, Vali 2 redefines what you can expect from an affordable tube amp, even at 2x its price.
Vali 2 is supplied with a single NOS RCA 6BZ7 tube, which can be swapped for the same tubes we use in Lyr 2 and Mjolnir 2 feel free to use virtually any ECC88, 6922, 6DJ8, 2492, etc to roll the sound to your own preference. Plus, you only need a single tube, so rolling is easy and more affordable!
Vali 2 delivers 1W into 32 ohms for hard-to-drive headphones and, at the same time, offers a low gain mode for low-noise performance with sensitive headphones. You can also use the preamp outputs to add a tube preamp to your power amp or powered monitors.
By made in USA, means made in USA. The vast majority of the total production cost of Vali chassis, boards, assembly, etc goes to US companies manufacturing in the US. Yes, the wall wart is from China, but that's it. There has to be some give and take to reach this price point.
Vali 2 is covered by a limited warranty that covers parts and labour for 2 year and tubes for 90 days.
Frequency Response: 20Hz-20Khz, -0.2db, 5Hz-150KHz, -3dB
Maximum Power, 16 ohms: 1300mW RMS per channel
Maximum Power, 32 ohms: 1000mW RMS per channel
Maximum Power, 50 ohms: 650mW RMS per channel
Maximum Power, 300 ohms: 270mW RMS per channel
Maximum Power, 600 ohms: 140mW RMS per channel
THD: <0.03%, 20Hz-20KHz, at 1V RMS in low gain
IMD: <0.05%, CCIR, low gain
SNR: >99db, unweighted, referenced to 1V RMS in low gain
Crosstalk: >-68dB, 20Hz-20KHz
Output Impedance: 1.2 ohms in low gain mode, 5.8 ohms in high gain mode
Gain: 5 (14db) or 1.25 (2db)
Topology: Tube voltage gain stage with convolved bipolar current mode inverter and discrete bipolar class AB output stage
Protection: delayed start and fast shut-down with muting relay
Power Supply: “wall wart” style 24VAC and 6VAC transformer, regulated HV and LV rails for tubes and bipolar components, 6V ac heater
Power Consumption: 9W
Size: 12.7 x 8.9 x 6.98cm
Weight: 0.46 kgs
Sorry no reviews yet!
Sorry not related yet!
No Items Yet!