Aeon Open Headphone
Voce Electrostatic Headphone
Aeon Closed Headphone
Ether C Headphone
Ether Flow Headphone
Ether C Flow Headphone
Omega Maple Headphone Stand
Omega Cherry Headphone Stand
Omega Walnut Headphone Stand
Omega Zebrano Headphone Stand
Omega Makassar Headphone Stand
The Schiit Mjolnir 2 is the only balanced tube hybrid headphone amplifier using 6BZ7 tubes or our all new LISST solid state tube option.
Yes, thatâ€™s right. You can get the Schiit Mjolnir 2 as a tube hybrid, or as a pure solid-state ampâ€”or get both, and swap out as youâ€™d like. You can also swap the standard 6BZ7 tubes for anything in the 6DJ8, 6922, ECC88, and 2492 families, to â€œrollâ€ the sound to your specific preference. Or just opt for the Schiit LISST (Linear, Integral Solid-State Tube) for a 100% solid state amp.
Schiit Mjolnir 2 puts out up to 8W/channel into 32 ohms, but is fully ready for high-sensitivity headphones with switchable gain. Use the standard gain of 8 for hard-to-drive headphones, or switch to a gain of 1 for sensitive on-ear models and IEMs. In addition, Mjolnir 2 also offers both balanced and single-ended input, switchable via the front panel. Want more? How about both balanced and single-ended headphone outputs and balanced and single-ended preamp outputs. Mjolnir also makes a great preamp for your power amps or powered monitors.
Schiit's Mjolnir uses our exclusive, inherently balanced and differential Crossfet topologyâ€”the only circlotron-style topology in a headphone amplifier (well, except for Ragnarok.) Itâ€™s balanced in and balanced out, with a custom 4-gang RK27 Alps volume potâ€”providing end-game performance for a mid-level price.
Most of the Schiit Mjolnir 2 is covered by a limited warranty that covers parts and labour for four years. Thatâ€™s 4 years. Yes Four. Compare that to the competition. The parts that arenâ€™t covered by a 4-year warranty: the tubes. Tubes are covered by a 28-day warranty. They should last between 3,000 and 5,000 hours. Please note this doesn't mean free upgrades!
Frequency Response: 20Hz-20Khz, -0.1db, 2Hz-400KHz, -3dB
Maximum Power, 32 ohms: 8W RMS per channel
Maximum Power, 50 ohms: 5W RMS per channel
Maximum Power, 300 ohms: 850mW RMS per channel
Maximum Power, 600 ohms: 425mW RMS per channel
THD: Less than 0.005%, 20Hz-20KHz, at 1V RMS
IMD: Less than 0.006%, CCIF at 1V RMS
SNR: Greater than 104db, unweighted, referenced to 1V RMS in low gain mode
Crosstalk: -75dB, 20 Hz-20KHz
Output Impedance: 1 ohm (high gain) 0.3 ohm (low gain)
Gain: 8 (18db) or 1 (0db), selectable via panel switch
Topology: Tube voltage gain or solid-state tube voltage gain, cross-shunt push-pull Crossfet output stage, non inverting, single voltage gain stage
Inputs: One pair balanced XLR, one pair single-ended RCAs, switchable via front panel switch
Outputs:one 4-pin balanced female XLR, one Â¼â€ TRS phono, one pair 3-pin male XLR preamp, one pair single-ended RCA
Power Consumption: 45W
Size: 30.6 x 22.3 x 6 cm
Weight: 5.4 kgs
*All measurements made on a Stanford Research SR1 or SR1+ Audio Analyser
Sorry no reviews yet!
Sorry not related yet!
No Items Yet!