• Mani-main-1000.jpg
  • Mani-back-1000.jpg
  • Mani-bottom-1000.jpg
  • mani insitu 1000.jpg
Product : Mani

Schiit Mani Phono Stage gives you high performance at low cost 

Schiit Mani gives you the flexibility you need for both moving-magnet and moving-coil cartridges, together with exceptionally accurate, low-noise performance for far less than you'd expect!

Accepting All Cartridges!

Many low-cost phono preamps are only good for typical moving-magnet (MM) cartridges. They don't have the gain needed for moving coil (MC), or the flexibility for high-output MM cartridges like Decca, or high-output MC cartridges that that might end up somewhere in the middle of the gain range. Schiit's Mani, with 4 switchable gain modes, (30, 42, 47, and 59dB) is ready for any cartridge you can throw at it.

Accurate, Quiet Passive RIAA Network

Schiit Manis RIAA network is implemented fully passively. What that means is there are no poles in the feedback loop, for more consistent sonic performance. Coupled with precision 2% film capacitors, 0.5% thin-film resistors, and super low-noise gain stages, Schiit Mani delivers superb accuracy and performance, even well beyond its modest price.

Made in USA

By made in USA, we mean made in USA. That goes for everything we make. No excuses. No assembled in USA. Yes, the wall wart is from China, but hey, it;s still a small part of the cost.

Mani is covered by a limited warranty that covers parts and labour for two years.

Specifications

  • Gain 1 = Low, Gain 2 = Low (Decca Mode) Gain 30db
  • THD: <0.005%, A-weighted, at 1V RMS
  • SNR: >90dB, A-weighted, inputs shorted
  • Crosstalk: -75dB, 20-20kHz
  • Sensitivity: 9mV for 300mV output
  • Overload Margin: >20dB
    Gain 1 = Low, Gain 2 = High (Standard MM Mode) Gain: 42dB
  • THD: <0.008%, A-weighted, at 1V RMS
  • SNR: >82dB, A-weighted, inputs shorted
  • Sensitivity: 2.3mV for 300mV output
  • Gain 1 = High, Gain 2 = Low (Low MM/High MC Mode) Gain: 48dB
  • THD: <0.01%, A-weighted, at 1V RMS
  • SNR: >80dB, A-weighted, inputs shorted
  • Sensitivity: 1.3mV for 300mV output
    Gain 1 = High, Gain 2 = High (MC Mode) Gain: 59dB
  • THD: <0.03%, A-weighted, at 1V RMS
  • SNR: >70dB, A-weighted, inputs shorted
  • Sensitivity: 0.3mV for 300mV output
    Input Impedance: Selectable 47 ohms or 47k ohms
  • RIAA Accuracy: +/- 0.2dB, 20 hz - 20 khz
  • Output Impedance: 75 ohms
  • Power Supply: “wall wart” style 16VAC transformer
  • Power Consumption: 4W
  • Size: 12.7 x 8.9 x 3.18 cm
  • Weight: 0.45 Kgs

*All measurements made on a Stanford Research SR1 or SR1+ Audio Analyser

Reviews

Sorry no reviews yet!

Use With

Sorry not related yet!

Mani

PHONO PREAMP FOR MC AND MM CARTRIDGES


Type: UK Mains Transformer

£140.00 inc VAT


Type: Euro Mains Transformer

£140.00 inc VAT

Schiit Mani Phono Stage gives you high performance at low cost 

Schiit Mani gives you the flexibility you need for both moving-magnet and moving-coil cartridges, together with exceptionally accurate, low-noise performance for far less than you'd expect!

Accepting All Cartridges!

Many low-cost phono preamps are only good for typical moving-magnet (MM) cartridges. They don't have the gain needed for moving coil (MC), or the flexibility for high-output MM cartridges like Decca, or high-output MC cartridges that that might end up somewhere in the middle of the gain range. Schiit's Mani, with 4 switchable gain modes, (30, 42, 47, and 59dB) is ready for any cartridge you can throw at it.

Accurate, Quiet Passive RIAA Network

Schiit Manis RIAA network is implemented fully passively. What that means is there are no poles in the feedback loop, for more consistent sonic performance. Coupled with precision 2% film capacitors, 0.5% thin-film resistors, and super low-noise gain stages, Schiit Mani delivers superb accuracy and performance, even well beyond its modest price.

Made in USA

By made in USA, we mean made in USA. That goes for everything we make. No excuses. No assembled in USA. Yes, the wall wart is from China, but hey, it;s still a small part of the cost.

Mani is covered by a limited warranty that covers parts and labour for two years.

Specifications

  • Gain 1 = Low, Gain 2 = Low (Decca Mode) Gain 30db
  • THD: <0.005%, A-weighted, at 1V RMS
  • SNR: >90dB, A-weighted, inputs shorted
  • Crosstalk: -75dB, 20-20kHz
  • Sensitivity: 9mV for 300mV output
  • Overload Margin: >20dB
    Gain 1 = Low, Gain 2 = High (Standard MM Mode) Gain: 42dB
  • THD: <0.008%, A-weighted, at 1V RMS
  • SNR: >82dB, A-weighted, inputs shorted
  • Sensitivity: 2.3mV for 300mV output
  • Gain 1 = High, Gain 2 = Low (Low MM/High MC Mode) Gain: 48dB
  • THD: <0.01%, A-weighted, at 1V RMS
  • SNR: >80dB, A-weighted, inputs shorted
  • Sensitivity: 1.3mV for 300mV output
    Gain 1 = High, Gain 2 = High (MC Mode) Gain: 59dB
  • THD: <0.03%, A-weighted, at 1V RMS
  • SNR: >70dB, A-weighted, inputs shorted
  • Sensitivity: 0.3mV for 300mV output
    Input Impedance: Selectable 47 ohms or 47k ohms
  • RIAA Accuracy: +/- 0.2dB, 20 hz - 20 khz
  • Output Impedance: 75 ohms
  • Power Supply: “wall wart” style 16VAC transformer
  • Power Consumption: 4W
  • Size: 12.7 x 8.9 x 3.18 cm
  • Weight: 0.45 Kgs

*All measurements made on a Stanford Research SR1 or SR1+ Audio Analyser

Reviews

Sorry no reviews yet!

Use With

Sorry not related yet!