• m2u-main-1920.jpg
  • m2u-rr-1920.jpg
  • magni2uber-board-1920.jpg
  • magnimodi2-uber-desk-1920.jpg
Product : Magni 2 Uber

Schiit Magni 2 Uber is ready for any headphone, from IEM's to Orthodynamics

The Schiit Magni 2 Uber is ready for any headphone, from IEMs to hard-to-drive orthodynamics. Switchable gain provides the fine control and low noise floor you need for sensitive headphones, as well as the power you need for hard-to-drive high-impedance headphones and orthos.

The Schiit Magni 2 Uber is now a complete desktop control centre with preamp capability and even more power. 

Even Better Sound and Performance

The Schiit Magni 2 Uber use a newly refined, fully discrete, constant-feedback gain stage. Yeah, we know, it sounds like engineering. But it's important. Not only is the Schiit Magni 2 Uber the only fully-discrete amp in its price class, they also uses a new gain stage with constant feedback across the entire audio band. No op-amp can claim to do this. In addition, with the Ubers gain stage being even more sophisticated, for higher performance. It is fully DC coupled, with no capacitors in the signal path. 

A Complete Desktop Control Center: Magni 2 Uber

If you need preamp outputs for powered desktop monitors (or for connecting to any power amplifier), or if you want even more power and performance, step up to Magni 2 Uber. With a more sophisticated gain stage and 3x larger power supply, it delivers power and performance far beyond anything at its price. 

Made in USA

By made in USA, we mean made in USA. The vast majority of the total production cost —chassis, boards, assembly, etc goes to US companies manufacturing in the US. 

The Schiit Magni 2 Uber is covered by a 2 Year limited warranty that covers parts and labour for two year. 

  • Frequency Response: 20Hz-20Khz, -0.1db, 2Hz-250KHz, -3dB
  • Maximum Power, 16 ohms: 2.1W RMS per channel
  • Maximum Power, 32 ohms: 1.5W RMS per channel
  • Maximum Power, 50 ohms: 1.2W RMS per channel
  • Maximum Power, 300 ohms: 320mW RMS per channel
  • Maximum Power, 600 ohms: 160mW RMS per channel
  • THD: Less than 0.002%, 20Hz-20KHz, at 1V RMS
  • IMD: Less than 0.003%, CCIF
  • SNR: Greater than 104db, unweighted, referenced to 1V RMS
  • Crosstalk: -70dB, 20 Hz-20KHz
  • Output Impedance: Less than 0.2 ohms
  • Gain: 1.5 (3db) or 6 (14db), selectable via rear switch
  • Preamp Output: Yes, controlled by volume pot when headphones removed
  • Topology: Fully discrete FET/bipolar, constant feedback through audio band, complementary VAS drive, Class AB, DC coupled throughout
  • Protection: Standard failsafe DC power input and muting relay
  • Power Supply: “wall wart” style 14VAC transformer, regulated +/- 16V rails, with over 6,000f filter capacitance
  • Power Consumption: 5W
  • Size: 12.7 x 8.9 x 3.18 cm
  • Weight: 0.45 kgs

*All measurements made on a Stanford Research SR1 or SR1+ Audio Analyser

Reviews

Sorry no reviews yet!

Use With

Sorry not related yet!

Magni 2 Uber

DISCRETE, VERY HIGH POWERED HEADPHONE AMPLIFIER


Type: UK Mains Transformer

£150.00 inc VAT


Type: Euro Mains Transformer

£150.00 inc VAT

Schiit Magni 2 Uber is ready for any headphone, from IEM's to Orthodynamics

The Schiit Magni 2 Uber is ready for any headphone, from IEMs to hard-to-drive orthodynamics. Switchable gain provides the fine control and low noise floor you need for sensitive headphones, as well as the power you need for hard-to-drive high-impedance headphones and orthos.

The Schiit Magni 2 Uber is now a complete desktop control centre with preamp capability and even more power. 

Even Better Sound and Performance

The Schiit Magni 2 Uber use a newly refined, fully discrete, constant-feedback gain stage. Yeah, we know, it sounds like engineering. But it's important. Not only is the Schiit Magni 2 Uber the only fully-discrete amp in its price class, they also uses a new gain stage with constant feedback across the entire audio band. No op-amp can claim to do this. In addition, with the Ubers gain stage being even more sophisticated, for higher performance. It is fully DC coupled, with no capacitors in the signal path. 

A Complete Desktop Control Center: Magni 2 Uber

If you need preamp outputs for powered desktop monitors (or for connecting to any power amplifier), or if you want even more power and performance, step up to Magni 2 Uber. With a more sophisticated gain stage and 3x larger power supply, it delivers power and performance far beyond anything at its price. 

Made in USA

By made in USA, we mean made in USA. The vast majority of the total production cost —chassis, boards, assembly, etc goes to US companies manufacturing in the US. 

The Schiit Magni 2 Uber is covered by a 2 Year limited warranty that covers parts and labour for two year. 

  • Frequency Response: 20Hz-20Khz, -0.1db, 2Hz-250KHz, -3dB
  • Maximum Power, 16 ohms: 2.1W RMS per channel
  • Maximum Power, 32 ohms: 1.5W RMS per channel
  • Maximum Power, 50 ohms: 1.2W RMS per channel
  • Maximum Power, 300 ohms: 320mW RMS per channel
  • Maximum Power, 600 ohms: 160mW RMS per channel
  • THD: Less than 0.002%, 20Hz-20KHz, at 1V RMS
  • IMD: Less than 0.003%, CCIF
  • SNR: Greater than 104db, unweighted, referenced to 1V RMS
  • Crosstalk: -70dB, 20 Hz-20KHz
  • Output Impedance: Less than 0.2 ohms
  • Gain: 1.5 (3db) or 6 (14db), selectable via rear switch
  • Preamp Output: Yes, controlled by volume pot when headphones removed
  • Topology: Fully discrete FET/bipolar, constant feedback through audio band, complementary VAS drive, Class AB, DC coupled throughout
  • Protection: Standard failsafe DC power input and muting relay
  • Power Supply: “wall wart” style 14VAC transformer, regulated +/- 16V rails, with over 6,000f filter capacitance
  • Power Consumption: 5W
  • Size: 12.7 x 8.9 x 3.18 cm
  • Weight: 0.45 kgs

*All measurements made on a Stanford Research SR1 or SR1+ Audio Analyser

Reviews

Sorry no reviews yet!

Use With

Sorry not related yet!